Washing Machine Outlet Box

HoldRite washing machine outlet boxes are designed for use in residential laundry spaces and allow for installation of water supply valves during the rough-in phase. They can be mounted for top or bottom supplied water lines and installed directly to a stud via flange holes or between studs using a hyco bar or HoldRite 170. Outlet box assemblies include hot and cold supply valves with quarter-turn handles and 3/4 in. male threaded hose connections. Can be used with copper, PEX or CPVC. Two inch drain socket and 3/4 in. IPS and CTS knockouts on top/bottom of box for connection of condensate/T&P drain lines. Face plate included. Optional integral water hammer arrestors for water shock wave prevention available. Drain funnel and other accessories sold separately.

• Compact design.
• Paintable trim cover that snaps into place - no adhesives or fasteners needed (will fit one or two layers of 1/2 in. or 5/8 in. sheetrock).
• Ships with debris cover and optional hot/cold valve marking labels.
• Attaches to 170/170-26 brackets (only in top position), hyco bar or directly to studs.
• Valves can be installed in upright or inverted position.
• Drain knockout on both sides of box. Each drain knockout includes (1) 3/4 in. CTS and (1) 3/4 in. IPS knockout for use with condensate or T&P relief piping (utilizing box drain).
• Optional funnel/diverter attachment for use when utilizing condensate/T&P to provide water wall effect to avoid splashing within the box.