HOLDRITE® HYDROFLAME™ PRO SERIES

CORRUGATED METAL DECK TELESCOPING FIRESTOP SLEEVES

*T-Rating when penetrant is non-metallic

Corrugated Metal Deck Plate

Corrugated Metal Deck Plates

Corrugated Metal Deck Plates

For use with concrete pours over corrugated metal decks
Assembles directly to HoldRite HydroFlame Pro Series Firestop Sleeves
Sizes available for 1 in., 2 in., 3 in., 4 in., 5 in. and 6 in. sleeves
Superior strength and stability
Telescoping design adjusts from 7-1/2 in. to 11-3/4 in., in ¼ in. increments

*Must be ordered with HydroFlame Pro Series Sleeves

NOTE: Use of a CD Plate must be accompanied with use of an outer sleeve or sleeve extension

Model Numbers

Corrugated Metal Deck Plates

Model Number	Penetrating Pipe Type	Used With	Nominal Pipe Size	Box Qty
HFPCD1	Plastic and Metal	HFP-P/M1, HFP-P/M1B, HFP-H2, HFP-H2B	1/4 in. - 1-1/4 in.	10
HFPCD2	Plastic and Metal	HFP-P/M2, HFP-P/M2B, HFP-H3, HFP-H3B	1 in. - 2 in.	10
HFPCD3	Plastic and Metal	HFP-P/M3, HFP-P/M3B, HFP-H4, HFP-H4B	1-1/4 in. - 3 in.	10
HFPCD4	Plastic and Metal	HFP-P/M4, HFP-P/M4B, HFP-H5, HFP-H5B	2-1/2 in. - 4 in.	10
HFPCD5	Plastic and Metal	HFP-P/M5, HFP-P/M5B, HFP-H6, HFP-H6B	3 in. - 5 in.	10
HFPCD6	Metal	HFP-P/M6, HFP-P/M6B, HFP-H7, HFP-H7B	4 in. - 6 in.	10
HFPCD6-DC	Plastic and Metal	HFP-P/M6, HFP-P/M6B, HFP-H7, HFP-H7B	4 in. - 6 in.	2

Telescoping Firestop Sleeves

Telescoping Firestop Sleeves

Ideal for flat concrete form decks – cast-in-place
Ideal for corrugated metal decks (corrugated deck plate required)
Available for ½ in. to 6 in. penetrants – piping, conduit, cables, etc.
For insulated and non-insulated pipes
Telescoping design adjusts from 7 1/2 in. to 11 3/4 in., in ¼ in. increments
Cut to as short as 2-1/2 in.
Black base and black whiskers identifies metal piping system
Red base and red whiskers identifies plastic or metal piping system
Includes locator whiskers, to locate buried sleeves and to identify pipe type (metal or plastic)
Dimensions on sleeves allows for simple height adjustments
Safety caps meet OSHA hole cover requirements
UL Listed firestop devices (2 or 3 hour F-ratings)
Meets and/or exceeds building code requirements
Built in fire, smoke, gas and water protection
UL W-Rated seal, water-tight for most penetrants
Allows for contraction, expansion, movement and off-center pipes
Reduces piping system noise transfer by maintaining annular spacing
Interlocking base capability assists with layout alignment
Extensions available for slabs over 11-3/4 in.
A variety of accessories are available
UL 50 Pa Ratings

Model Numbers

Telescoping Firestop Sleeves

Model Number	Penetrating Pipe Type	Nominal Pipe Size	Box Qty
HFP-P1	Plastic and Metal	1/2 in. - 1 in.	10
HFP-P2	Plastic and Metal	1-1/4 in. - 2 in.	10
HFP-P3	Plastic and Metal	2 in. - 3 in.	10
HFP-P4	Plastic and Metal	3 in. - 4 in.	10
HFP-P5	Plastic and Metal	4 in. - 5 in.	2
HFP-P6	Plastic and Metal	5 in. - 6 in.	2
HFP-M1	Metal	1/2 in. - 1 in.	10
HFP-M2	Metal	1-1/4 in. - 2 in.	10
HFP-M3	Metal	2 in. - 3 in.	10
HFP-M4	Metal	3 in. - 4 in.	10
HFP-M5	Metal	4 in. - 5 in.	2
HFP-M6	Metal	5 in. - 6 in.	2

Sleeve Extensions

Sleeve Extensions

Extends the height of HoldRite HydroFlame Pro Series sleeves by as much as 4 3/4 in. in 1/4 in. increments
No coupling needed for connection to sleeves
Ideal for use on concrete pours over 11-3/4 in.
Available for all HoldRite HydroFlame Pro Series sleeve sizes
Connects to safety caps, water dams, water modules and underside of sleeves

Model Number	Fits Firestop Sleeves	Fits Hollow Sleeves	Nominal Pipe Size	Box Qty
HFPE1	#1 Firestop Sleeve	#2 Hollow Sleeves	1/4 in. - 1-1/4 in.	5
HFPE2	#2 Firestop Sleeve	#3 Hollow Sleeves	1 in. - 2 in.	10
HFPE3	#3 Firestop Sleeve	#4 Hollow Sleeves	1-1/4 in. - 3 in.	10
HFPE4	#4 Firestop Sleeve	#5 Hollow Sleeves	2-1/2 in. - 4 in.	10
HFPE5	#5 Firestop Sleeve	#6 Hollow Sleeves	4 in. - 5 in.	2
HFPE6	#6 Firestop Sleeve	#7 Hollow Sleeves	5 in. - 6 in.	2

Resources

“FBC™ System Compatible indicates that this product has been tested, and is monitored on an ongoing basis, to assure its chemical compatibility with FlowGuard Gold®, BlazeMaster® and Corzan® piping systems and products made with TempRite® Technology.” “The FBC System Compatible Logo, FBC™, FlowGuard Gold®, BlazeMaster®, Corzan®, and TempRite® are trademarks of Lubrizol Advanced Materials, Inc. or its affiliates.”