Skip to main content

HydroFlame™ Pro Electrical Firestop Sleeve with Adjustable Cap

HydroFlame™ Pro electrical firestop sleeves with adjustable caps are ideal for metal or plastic conduits up to 6 inches in diameter or single cables or cable bundles up to 4-1/2 inches in diameter

Features and benefits:
  • Can be cut down as low as 3-1/2 in.
  • Sleeves come with a green locator whisker to easily identify electrical penetrations above the slab after the concrete has been poured.
  • Sleeve comes with a green colored base to easily identify electrical penetrations from underneath the slab after concrete has been poured.
  • For use in new commercial concrete floor construction (flat deck concrete, post tension concrete slabs, and concrete over metal decking).
  • 7-1/4 in. to 8 in. tall with adjustable cap. Extensions available.
  • Dimensions on sleeve allows for simple height adjustment when cutting.
  • Safety caps meet OSHA hole cover requirements.
  • Built-in fire, smoke, gas and water protection.
  • UL W-Rated seal, water-tight for most penetrants, refer to UL System data for specific sizing requirements.
  • Allows for contraction, expansion, movement and off-center penetrants.
  • Reduces piping system noise transfer by maintaining annular spacing.
  • Interlocking base capability assists with layout alignment.
  • A variety of accessories are available.
  • Tested to ASTM E814, UL 1479, and CAN/ULC S115 testing standards.
  • ULC 50 Pa Ratings.
  • ASTM E90 acoustic isolation data available.
  • ASTM G21 mold and mildew.