HydroFlame™ Firestop Putty Pad
Install trusted fire seals around electrical boxes with putty pads.
HoldRite™ HydroFlame™ fire putty pads are a non-curing, single component, fire-rated material for membrane-penetration firestop sealants. They are ideal for protecting recessed electrical boxes – metallic and non-metallic. The intumescent properties cause our fire putty pads to expand when exposed to heat, creating a fire-rated seal that will stop penetrants from spreading.
Installing Firestop Putty Pads
Since our putty pads are single component, there’s no additives required or on the job mixing. Up-to-code and easy to install, it’s no wonder pros trust HoldRite putty pads on the job site. Simply peel off the backing and apply the fire putty where needed. The adhesive putty pad is moldable and will stick to all common building surfaces. The seal is instant, providing UL-Listed fire, smoke and gas protection with no curing period.
Features and benefits:
- Free of volatile solvents, particularly useful when installing in confined spaces or occupied areas
- Free of asbestos fillers
- Applied by hand and easy to install
- Designed to adhere to all common building surfaces
- Clean Air Gold certified
- UL Listing CLIV Report certified
- Not subject to DOT regulations
SKU | Dimensions |
---|---|
HF-PP-1 | 7 in. x 7 in. x 1/8 in. |
HF-PP-2 | 9 in. x 9 in. x 1/8 in. |
Common Applications
- Intumescent firestopping
- Firestop sealant
Approvals & Listings
- Clean Air Gold certified
- UL Listing CLIV Report
UL Listing CLIV Report.
Clean Air Gold Certified and has no volatile solvents.
No mixing or additives necessary.
“FBC™ System Compatible indicates that this product has been tested, and is monitored on an ongoing basis, to assure its chemical compatibility with FlowGuard Gold®, BlazeMaster® and Corzan® piping systems and products made with TempRite® Technology.” “The FBC System Compatible Logo, FBC™, FlowGuard Gold®, BlazeMaster®, Corzan®, and TempRite® are trademarks of Lubrizol Advanced Materials, Inc. or its affiliates.”