HydroFlame™ Pro Water Dam
The Hydroflame Pro Water Dam attaches to the top of the Pro Series cast-in-place firestop sleeves and adds a water dam barrier at the perimeter of the sleeve opening.
- Adds 2 inches of overall height to the HoldRite HydroFlame Pro Series Sleeve
- Load-rated for riser clamp support – see product spec sheet
- Installed after concrete pour and safety cap removal
|SKU||Fits Firestop Sleeves||Fits Hollow Sleeves||Pipe Size|
|HFPWD1||#1 Firestop Sleeves||#2 Hollow Sleeves||1/4 – 1-1/4 in.|
|HFPWD2||#2 Firestop Sleeves||#3 Hollow Sleeves||1–2 in.|
|HFPWD3||#3 Firestop Sleeves||#4 Hollow Sleeves||1-1/4 –3 in.|
|HFPWD4||#4 Firestop Sleeves||#5 Hollow Sleeves||2-1/2 – 4 in.|
|HFPWD5||#5 Firestop Sleeves||#6 Hollow Sleeves||4–5 in.|
|HFPWD6||#6 Firestop Sleeves||#7 Hollow Sleeves||4–6 in.|
Approvals & Listings
- ASTM E90
UL-Listed accessory when used with HoldRite's HydroFlame Pro Series Sleeves.
Sizes are available to fit all Pro Series Sleeves, for all sizes of penetrants — ½ in. thru 6 in. nominal size.
Load-rated for riser clamp support.
“FBC™ System Compatible indicates that this product has been tested, and is monitored on an ongoing basis, to assure its chemical compatibility with FlowGuard Gold®, BlazeMaster® and Corzan® piping systems and products made with TempRite® Technology.” “The FBC System Compatible Logo, FBC™, FlowGuard Gold®, BlazeMaster®, Corzan®, and TempRite® are trademarks of Lubrizol Advanced Materials, Inc. or its affiliates.”