HydroFlame™ Pro Water Dam
The Hydroflame Pro Water Dam attaches to the top of the Pro Series cast-in-place firestop sleeves and adds a water dam barrier at the perimeter of the sleeve opening.
Features and benefits:
- Adds 2 inches of overall height to the HoldRite HydroFlame Pro Series Sleeve
- Load-rated for riser clamp support – see product spec sheet
- Installed after concrete pour and safety cap removal
| SKU | Fits Firestop Sleeves | Fits Hollow Sleeves | Pipe Size |
|---|---|---|---|
| HFPWD1 | #1 Firestop Sleeves | #2 Hollow Sleeves | 1/4 – 1-1/4 in. |
| HFPWD2 | #2 Firestop Sleeves | #3 Hollow Sleeves | 1–2 in. |
| HFPWD3 | #3 Firestop Sleeves | #4 Hollow Sleeves | 1-1/4 –3 in. |
| HFPWD4 | #4 Firestop Sleeves | #5 Hollow Sleeves | 2-1/2 – 4 in. |
| HFPWD5 | #5 Firestop Sleeves | #6 Hollow Sleeves | 4–5 in. |
| HFPWD6 | #6 Firestop Sleeves | #7 Hollow Sleeves | 4–6 in. |
Approvals & Listings
- ASTM E90
UL-Listed accessory when used with HoldRite's HydroFlame Pro Series Sleeves.
Sizes are available to fit all Pro Series Sleeves, for all sizes of penetrants — ½ in. thru 6 in. nominal size.
Load-rated for riser clamp support.
“FBC™ System Compatible indicates that this product has been tested, and is monitored on an ongoing basis, to assure its chemical compatibility with FlowGuard Gold®, BlazeMaster® and Corzan® piping systems and products made with TempRite® Technology.” “The FBC System Compatible Logo, FBC™, FlowGuard Gold®, BlazeMaster®, Corzan®, and TempRite® are trademarks of Lubrizol Advanced Materials, Inc. or its affiliates.”