Skip to main content

HydroFlame™ Pro Firestop Sleeve with Adjustable Cap

These HydroFlame firestop sleeves give you more flexibility during installation with a cap that allows you to adjust the height of your sleeve in quarter-inch increments along the barrel of the sleeve. Ideal for insulated and non-insulated pipes when working with flat concrete form decks. 

Features and benefits:
  • 7-1/4 in. to 8 in. tall with adjustable cap. Can be cut to as short as 3 1/2 in. Extensions available. 
  • Black base and black whiskers identifies metal piping system 
  • Red base and red whiskers identifies plastic or metal piping system 
  • Also for use with floor drains, shower drains, closet flanges, multi-pipe penetrations, refer line-sets, etc.
  • Includes locator whiskers, to locate buried sleeves and to identify pipe type (metal or plastic) 
  • Dimensions on sleeve allows for simple height adjustment when cutting 
  • Safety caps meet OSHA hole cover requirements 
  • Built in fire, smoke, gas and water protection 
  • UL W-Rated seal, water-tight for most penetrants, refer to UL System data for specific sizing requirements 
  • Allows for contraction, expansion, movement and off-center pipes 
  • Reduces piping system noise transfer by maintaining annular spacing 
  • Interlocking base capability assists with layout alignment 
  • A variety of accessories are available 
  • Tested to ASTM E814, UL 1479, and CAN/ULC S115 Testing Standards
  • ULC 50 Pa Ratings 
  • ASTM E90 acoustic isolation data available
  • ASTM G21 mold and mildew
  • FBC Compatible for CPVC
HydroFlame Pro Series Sleeves

HydroFlame Pro Series Sleeves

The HydroFlame Pro system contractors trust now has more versatility. The updated HydroFlame Pro Series firestop sleeves give you more control over your firestopping installations with the ability to adjust down to 7-1/4 inches and now with a 5-inch sleeve option.

Watch HydroFlame Pro Series Firestop Sleeves - Product Highlight | HoldRite on YouTube.
cUL Listed
fbc compatible
Buy american act logo
made in usa icon - rwc

“FBC™ System Compatible indicates that this product has been tested, and is monitored on an ongoing basis, to assure its chemical compatibility with FlowGuard Gold®, BlazeMaster® and Corzan® piping systems and products made with TempRite® Technology.” “The FBC System Compatible Logo, FBC™, FlowGuard Gold®, BlazeMaster®, Corzan®, and TempRite® are trademarks of Lubrizol Advanced Materials, Inc. or its affiliates.”